Girbau Industrial unveils 190-pound capacity soft-mount HS-Series Washer
Tuesday, July 3, 2018
Oshkosh, Wis.— Girbau Industrial (GI) recently added a 190-pound capacity HS-Series Washer-Extractor (HS6085) to its soft-mount washer lineup. Engineered to drastically improve laundry production, linen life and utility efficiency, the HS6085 features a robust 30-cubic-foot basket capacity, highly flexible Inteli control, and up to 12 internal and external chemical dosing signals. Delivering high performance and backed by an industry-leading 5/3-year warranty, the HS6085 outputs extract speeds up to 386 G-force and is available in stationary and tilt models.
The new HS6085 rounds out the HS-Series soft-mount lineup, which includes 130-, 190-, and 255-pound capacity models, according to Seth Willer, Girbau Industrial national sales manager. “The HS6085 is a high-performance, highly programmable washer that fills a capacity gap in our soft-mount lineup.”
Like all HS-Series washers, the HS6085 features a Multi Directional Springs system that absorbs vibrations and noise. This eliminates the need for ground anchoring. While hard-mount washers require approximately 18 inches of clearance between installed machines, HS-Series soft-mount washers only require a half inch. Thus, HS-Series Washers bring simpler installation and tighter clearances for gains in production per linear foot over hard-mount machines.
Similarly, HS-Series Washers, and the HS6085 specifically, reach higher extract speeds when compared to most hard-mount washers on the market. The HS6085 offers high-speed extract reaching up to 386 G-force. By comparison, most hard-mount washers only reach 70-200 G-force extract speeds. As a result, HS-Series Washers remove considerably more water from each load, which reduces the time it takes to dry a load of laundry by as much as 50 percent, according to Jorgensen. “Because laundry takes less time to dry, drying tumblers and linens experience less wear and tear. This improves the longevity of linens and towels, as well as dryers,” he said. Thanks to the high-speed extract of HS-Series Washers, facilities can bolster laundry productivity using less labor and utilities.
The new HS6085 boasts superior programmability thanks to the Inteli Control, which offers 20 pre-programmed and 79 modifiable cycles. Via the Inteli, operators gain complete control over every variable of the wash process, including water temperature by degree, five levels of mechanical action, water levels, chemical injection, bath cool-down by degree and extract speed.
Making programming simple and quick, the Inteli Management Tool (IMTx) allows users to design wash programs and configurations on their computers or tablets, save and organize them by account or category. Multiple programs can be viewed simultaneously using IMTx so it is easy to compare, copy and modify each of the parameters within separate programs. The programs can be saved to an Inteli memory card and shared via email – making it quick and easy to copy programs onto other machines.
Finally, the Inteli’s SmartLoad system automatically adjusts water consumption and dosing time to coincide with a load’s weight, fabric type and program selected – lowering water usage and labor time.
Engineered for unsurpassed efficiency, HS-Series Washers use approximately .82 gallons of water per laundry pound, depending on the model. A water recycling system reuses prewash and wash water – slashing consumption by up to 50 percent over machines without similar systems.
Further decreasing water waste are the AquaFall and AquaMixer systems. AquaFall releases water into the load via holes in the drum lifters. As the drum turns, lifters release water from above to better penetrate fabric. With HS-Series, laundry is saturated from above and below. This cuts water usage and rinse cycle times while improving wash quality. AquaMixer further improves efficiency by mixing hot and cold water before entering the drum – creating precise water temperatures for greater control over hot water consumption.
To find out more about Girbau Industrial products, backed by industry-leading manufacturer’s warranties, visit www.girbauindustrial.com or call 800-256-1073.
One of three brands of Continental Girbau Inc., Girbau Industrial provides industrial laundry products to North American clients, including large-capacity washer-extractors and drying tumblers, high-volume flatwork ironers, continuous batch tunnel washing systems, presses, feeders, folders, stackers conveyor systems and related system machinery.
Continental Girbau Inc. is the largest of 15 subsidiaries of Girbau Global Laundry Solutions, based in Vic, Spain. Girbau laundry products – marketed throughout 100 countries worldwide – meet rigorous environmental and safety standards established by the International Organization for Standardization (ISO). Girbau holds both ISO9001 and ISO14001 certifications. Ever focused on laundry efficiency, Continental Girbau is a member of the U.S. Green Building Council (USGB), a 501(c)(3) nonprofit that developed the Leadership in Energy and Environmental Design (LEED) Green Building Rating System.